среда, 13 апреля 2016 г.

How to Re-Cover a Dining Room Chair

How to Re-Cover a Dining Room Chair
How to Re-Cover a Dining Room Chair

Dining Room Fireplace
Dining Room Fireplace

Select chairs and fabric. Remove seat cushion from chair frame and original fabric from cushion. Tip: When selecting the new fabric, choose one that coordinates with the decor of your dining room.


Gather Materials
Gather Materials

Place seat frame with cushion side face down on lining. Trace three inches out from edge of cushion around entire frame using temporary fabric pen. Cut along line.


Cut the Lining
Cut the Lining

Attach lining to frame using staple gun. Begin by stapling lining to frame at center point of each side, and then at each corner, pulling fabric tautly around frame. After sides and corners are stapled in place, continue securing lining to frame by working from center point to corner.


Staple Fabric to Chair
Staple Fabric to Chair

Trim the Fabric
Trim the Fabric

Place lined seat frame face down on fabric. Trace three inches out from edge of cushion around entire frame using temporary fabric pen. Cut along line. Tip: If using a patterned fabric, appropriately position the design on the seat cushion.


Measure and Cut Fabric
Measure and Cut Fabric

Attach fabric to frame using staple gun. Begin by stapling fabric to frame at the center point of each side, and then at each corner, pulling fabric tautly around frame.


Staple Fabric to Cushion
Staple Fabric to Cushion

After sides and corners are stapled in place, continue securing fabric to frame by working from center point to each corner. Pull fabric snuggly around curved corners to eliminate tucks on top side of cushion.


Securing the Fabric
Securing the Fabric

After seat cushion is covered with new fabric, reattach to chair frame using original hardware.


Original article and pictures take http://www.hgtv.com/design/rooms/living-and-dining-rooms/how-to-re-cover-a-dining-room-chair site


Комментариев нет:

Отправить комментарий