четверг, 24 декабря 2015 г.

DIY Command Center - Shanty 2 Chic

DIY Command Center - Shanty 2 Chic
DIY Command Center - Shanty 2 Chic



Hey guys!! School is about to start, around here, and we are in the “I need to get control over my junk” mode! Whitney and I designed this super cute Command Center to get started and we’ve got the free plans for you and a new how-video! You can watch the video HERE or click “play” below to watch! Make sure to subscribe so you don’t miss one



Now, you can click HERE for the free printable plans and follow along in the tutorial below, to build your own


apply-wood-glue-to-mail-dividers
I started by making the cuts. Then, I assembled the mail sorter. Apply a thin line of wood glue

assemble-mail-sorter
and then attach the bottom 1×3 piece to the mitered 2×3 pieces. Refer to the plans for the exact placement!

attach-bottom-of-nail-sorter
Add the middle mail divider with wood glue and brad nails.

place-mail-sorter-on-craftboard
Next, apply wood glue and place the mail sorter on the project panel. Refer to the plans for the placement

attach-mail-sorter-to-craft-board

We attached the mail sorter with 1 1/4″ pocket holes. This is not necessary. If you don’t have a Kreg Jig, you can use brad nails and wood glue. Just nail from the back of the craft board into the mail sorter. Just make sure to mark exactly where your mail sorter is on the back of the craft board.


attach-luan-board-to-mail-sorter
Now, attach a 3″ wide luan (or craft board piece) to the front of the mail sorter with wood glue and brad nails. This piece will be flush with the bottom of the mail sorter.

stain-command-center

We chose to stain our mail center with Varathane Carbon Grey stain. Just apply one coat, let it sit for about 5 minutes then wipe it with a clean cloth. We used a disposable foam brush to apply the stain. You can find Varathane stain HERE on Amazon.


spray-paint-mesage-board

While the stain dries, spray paint the 5.5″ wide luan (or craft board) with 2 coats of Rust-Oleum Chalkboard spray paint. You can find the spray paint HERE on Amazon.


attach-chalkboard-piece-to-craftboard

When the stain dries, attach the chalkboard piece to the top corner of the craft board with wood glue, nail heads and a hammer. You can find the nail heads HERE on Amazon.


Finally, add a couple of bull clips for pictures or notepads and cup hooks for keys!


DIY-Command-Center

DIY-Command Center

That’s it!! Do you need to command your junk? If you build this Command Center share it with us on our social media channels and make sure to subscribe to our Youtube


Thanks so much for stopping by!


Happy Building


Original article and pictures take http://www.shanty-2-chic.com/2016/08/diy-command-center.html site


Комментариев нет:

Отправить комментарий